Welcome aboard. This place has great info to assist in builds!

Thanks Dave! I guarantee that I will have some reference questions to post in the future.

I was watching large car wrecker videos on YouTube. Not only do I find them entertaining but a source of inspiration as well. I watch Pepe's out of LA, Wilcox Garage based in Willard, Ohio, and Sumter Wrecking from Sumter, SC. Each company has unique operational areas and challenges which makes it even more interesting. Sumter Wrecking in South Carolina has an old Holmes 750 mounted on a 1985 Freightliner they use to pull farm equipment out of the Carolina clay because its relatively light weight means it won't get stuck like a heavier rig might. I decided my fantasy fleet needed a similar unit. Being from an agricultural county here in Ohio means we have lots of farmers with lots of wet fields sometimes. But I wanted my wrecker to be a 6 by 6 on flotation tires to maybe keep it from getting stuck. I started a Holmes 1801 wrecker 25 years ago and never finished it but I did save all the parts I scratch built. According to tow truck operators back in the day they described the pulling power of an 1801 like this..."if you think a Holmes 750 pulls hard, you should see an 1801 at work". STS Supply supplied the C500 hood and the front drive axle which I modified to make it poseable. Not hard to do once you see how STS molded the part. The body of this particular model came from AMT's 'Big Stick' kit. I modified it and stretched it with Evergreen Scale Models styrene sheets and shapes. The '1801' was pretty much done but I did change some minor things to improve its appearance...meaning I got better 25 years later.   It's still a WIP but will be done soon as the weather breaks. Queenie hates it when I paint in the house and MomNature hasn't warmed up enough to paint outside....***sigh***.

I have a thing for trucks that 'work' for a living. Not to demean over the road units with all the chrome and flash because hauling 40tons cross country takes a strong rig in its own right. Let's just say I like trucks that get down and dirty when doing their jobs. I also like large car wreckers. I am a retired truck driver with 42 years experience, and I am also a model builder with 66 years of experience. I love to scratch build and modify whether it be a 1/25 scale '58 Impala with a chopped top or a fleet of large cars. I rarely build model cars now because of my love of large cars. I have a fantasy fleet of wreckers that I started several years ago, and this is the latest addition to that fleet. I purchased a T800 resin hood from STS Supply and got started. This model is your basic 4 axle wrecker/recovery unit that is not modelled after any particular manufacturer like Challenger or Miller Industries. I like to use another fantasy company called W.A.G Engineering. The W.A.G. stands for Wild Ass Guess! That means I have a basic idea of what I want to build but with no plans to go by it becomes a build as you go thing. With the exception of the kit parts you see the entire wrecker body/unit were built using Evergreen Scale Models sheet plastic and various structural shapes, all in styrene plastic. I like Testor's in the orange tube to hold it all together. I decided the wheel lift was going to be modelled after a Zack lift unit I saw installed on a 1:1 wrecker. I like all my 'important' parts to be poseable.  

Thank you. 

Wow! This is an incredible build. What a great piece of equipment. Your scratch-building skills are top-notch. The operating features are equally impressive.

The inspiration for this build came from a real wrecker/recovery Peterbilt owned by a company just a few miles from where I live. I watched the wrecker in action and was amazed at the capability it exhibited. I knew I had to build one albeit on a KW chassis cause in my world there are only two large cars made...KW and all the rest!  Anyway, the real rig weighs 102,000 pounds and that's why it has 5 axles. Here in Ohio where I live it has a special permit to operate on highways throughout the state. Since I can be in WV or Pennsylvania in less than 20 minutes I'm assuming the company, Marlboro Towing, has similar permits in those states as well. The model is almost entirely scratch built using Evergreen Scale Models styrene plastic sheets and structural shapes. The only kit parts used were the frame, rear axle assembly, the cab/interior, a few other odds and ends. It's worth noting the hood is entirely scratch built with the exceptions of the GMC General fenders I had laying around. The entire wrecker unit is scratch built. The wrecker rotates and will travel a scale 7 feet on the frame, front to back. 

This thing looks pretty sweet!

Some of the older AMT  WFL kits had Plastic 2 piece tires they looked the best. I’ll see if I can find some and post them 

Mock up time! I put on what I believe will be the final coat of primer. Mr. Hobby Mr. Surfacer 1500 Black. Great stuff. I’ve had such good luck with this brand, highly recommended. Looks pretty sinister in all matt black, huh? But, plenty of chrome, aluminum and stainless will be added along with a glossy black finish. Some final fitting and minor adjustment will be needed with the body, cab, hood, and chassis, but overall, it fits together very well at this point.